Made in India by AA Thread Company since 2017 · Free delivery across India · GST invoice on every orderinfo@aathreadco.in · Call / WhatsApp +91 74041 22020

Bag Closer Machine Not Stitching? 8 Common Problems and How to Fix Them

Short answer: If your bag closer machine is not stitching, check five things in this order: (1) the machine is threaded through every guide and the needle eye, (2) the needle is straight, sharp and fitted the right way round, (3) the thread tension is not too tight or too loose, (4) the machine is oiled, and (5) the thread is a proper bag closing thread for your bags. These five fix most problems in a few minutes. If the needle moves but no chain forms even after this, the looper needs a mechanic.

Safety first: switch off and unplug the machine before you thread it, change the needle or clean it. Keep fingers away from the needle and cutter while it runs.

Quick fault finder

Problem Most likely cause Fix
Needle moves but no stitch forms at all Wrong threading, needle fitted backwards, bent needle Re-thread from the cone, refit or replace the needle
Skipped stitches (gaps in the chain) Blunt or bent needle, thread too thick, dry machine, worn looper New needle, correct thread, oil; if it continues, looper check
Thread keeps breaking Tension too tight, thread catching at the cone, rough guide or needle eye, weak thread Loosen tension, let the cone feed freely, change needle, change thread
Stitch opens or unravels after the bag is closed Chain cut too short, tension too loose Leave a tail of chain after the bag, tighten tension a little
Bag does not move forward Dirty or worn feed dog, bag held back by hand Clean the feed dog, guide the bag lightly without pushing or pulling
Machine is noisy, hot or stiff Not enough oil, dust from grain, cement or fertiliser Clean and oil the moving parts
Motor runs weak or stops Low voltage, worn carbon brushes, overheating Check supply, rest the machine, get the motor serviced
Cutter does not cut the chain Blunt blade Sharpen or replace the cutter blade

1. Threading: the cause of most “not stitching” problems

A portable bag closer makes a chain stitch with one thread (two threads on double needle models). If the thread misses even one guide or the tension discs, the needle cannot form a loop and the looper has nothing to catch.

  1. Put the thread cone on the stand so the thread comes off straight up, not at an angle.
  2. Follow the threading diagram on your machine or in the manual: guide, tension discs, take-up guide, then the needle eye.
  3. Make sure the thread sits between the tension discs, not on top of them.
  4. Pass the thread through the needle eye in the direction shown in the manual and pull out a few inches.
  5. Run the machine once without a bag; you should see a chain form under the presser foot.

2. Needle: change it more often than you think

Jute, HDPE and PP woven bags wear needles quickly. A needle that looks fine can still have a burr in the eye or a slightly bent tip.

  • Replace the needle if you see skipped stitches, thread fraying or a “click” sound.
  • Fit the needle fully up in the needle bar, with the long groove facing the side shown in the manual.
  • Use the needle type listed for your model; a wrong needle size causes skips and breaks.

3. Thread tension

Too tight and the thread snaps or the chain puckers the bag. Too loose and the chain is loose and can unravel. Start loose, then tighten a little at a time until the chain is firm and flat on the bag.

4. Oiling and cleaning

Many portable bag closers, including the REVO and LPI models without oil pump, need oil by hand. A dry machine skips stitches, gets hot and wears out fast.

  • Put a few drops of sewing machine oil in every oil hole marked on the machine, as often as your manual says (more often in heavy daily use).
  • Blow or brush out dust from the feed dog and looper area every day, especially when stitching rice, atta, cement or fertiliser bags.
  • Wipe off extra oil so it does not stain the bags.

5. Use the right bag closing thread

Ordinary tailoring thread or a weak, knotted cone breaks again and again. Use thread made for bag closing machines:

Not sure which to use? Send us your bag type on WhatsApp and we will tell you.

When to call a mechanic

If the machine is threaded correctly, has a new needle, is oiled and uses good thread, but still does not form a chain, the looper is likely worn or out of timing, or a gear is damaged. Looper timing needs the right tools, so get it done by a trained mechanic. For REVO and LPI machines bought from us, call or WhatsApp +91 74041 22020.

Choosing a new bag closer

If your old machine needs frequent repairs, compare models in our REVO vs LPI bag closer guide or see all bag closing machines, including single needle (REVO Model DA, LPI Model DA) and double needle (REVO Model DAD) machines. A replacement REVO motor is also available.

Single or double needle? See single vs double needle bag closer to choose the right machine for your bags.

Choosing thread? See polyester vs PP bag closing thread, with cost per metre.

Oil, needle and motor care for REVO and LPI machines: bag closer maintenance guide.

FAQ

Why is my bag closer machine not stitching even though the needle moves?
Usually the thread has missed a guide or the tension discs, or the needle is bent or fitted the wrong way. Re-thread from the cone and fit a new needle. If a chain still does not form, the looper needs checking.

Why does the stitch open when I pull the thread?
A chain stitch unravels from the end. Leave a few inches of chain after the bag and cut it there; do not cut the chain right at the bag edge.

How often should I oil a bag closer?
Follow your manual. Machines without an oil pump need oil by hand regularly; in daily heavy use, oil at the start of every shift.

Which thread is best for a bag closing machine?
Polyester 3×12 or 3×15 bag closing thread suits most bags; PP thread is a lower-cost option. Avoid tailoring thread.

Scroll to Top